Is there anything else that I need to install my EVO-ALL on my 2011 Sedan Altima 2.5?

Question

Are these ONLY 15 wires that I need to connect to install my remote start with this bypass, beside lock/unlock and lights/horn.

Remote start:  Viper Responder One "2 ways single button".

Do I need to connect?  - Ignition 2; - Starter 1 and - Starter 2; Accessory 1 and Accesory 2? I am very new to this product and not very familar with it.  I am only working with Xpresskit and switching over to this units.

Bypass:  EVO-All - Installation connection 5. D2D connection

Thank you in advance.

Here is my current connection from my Viper transponer one.

When I press the remote start button twice, it doesnt do anything accept long beep with red light from remote start button.  What did i do wrong here?  Thanks

Answer 1

if using datalink, the H2/3 wire (+)brake shutdown should not be connected to the vehicle at all. The eVO-ALL gives brake status to the Viper system via datalink.  Another thing about using datalink with Viper or any DEI system, you will want to turn on Option F3 - D2D in the EVO-ALL options or else datalink will not work properly.

 

The installation does not require anything more than what is in the install guide. So no 2nd ign, acc, or start.

 

If the unit programmed correctly and what i mentionned above is corrected, you should have no problems.

Comments

Thank you so much for you fast respond.  I am going try it now.

---

Thank you so much for your support over the phone.  I got every setup and good to go.  Just want to update if anyone else needs this lock and unlock connection wires color.

Lock === Gray

Unlock == Green

On 2011 Nissan Altima Sedan 2.5S - At kick panel.

---

Robert,

Could you please add that LOCK/UNLOCK wire picture that Tu Le posted on your wirecolor database? Things like this are very helpful and will shave install time nicely

Thanks

---

Done. i added the link to this so Tu gets the proper credit.