Can i add a DEI 508D Proximity Motion Sensor to a EVO-ALL in a Wrangler 2014 (without factory alarm) ?

Question

I bought a EVO-CHRT5 recently, is still on the way to my home. I have a Wrangler 2014 without factory alarm, i want to use the ALARM and REMOTE START feature of the EVO-ALL, but i want to know if is possible add a 508D Proximity Motion Sensor. It is possible? This proximity sensor has 2 outputs, because have 2 stage of motion detect. How can i setup it on the EVO-ALL?

 

Thank you!

Answer 1

After installation the unit as a remote starter, you will need to set up the EVO as an alarm using this installation guide. : Download Installation Guide

 

For the shock sensor, you will need to join both trigger outputs (with diodes) to the trigger input on the EVO.

 

 

Comments

Thank you for your reply Robert.

Today i received the EVO CHRT5, i installed it and the remote start works fine. After it i activated the Alarm function but it doesn't work. The horn doesn't sound when I press the lock button, and it doesn't monitor if the doors open.

My Jeep Wrangler 2014 doesn't have factory alarm, and i bought the EVO to add alarm and remote start.

Please help me to solve it.

---

Did  you connect the horn output?

What is the service number on the EVO?

---

Now i noticed that is necessary connect the Horn, i thought that the EVO was plug&play and activate the horn by CAN bus. I have to connect several wires to put the alarm to work.

 

My service number is 001A06 418121.

 

How can i get access to Wirecolor wiring information? I can't find de Activation Key on the box

---

Can't activate the horn throuhg can-bus. Connections will be required when using special configurations such as EVO-ALARM, that's why i linked you the guide previously.

The activation card should be in the box unless someone has removed it. . You can email support@ifar.ca for the wiring info.