I'm having identical problems with HondaSL3 on two different vehicles

Question

I'm working with a 2003 Pilot and a 2013 CRV.   In both vehicles the programming seems to complete normally, but the remote starts behave as if the bypass was not working.   We checked all wiring - everything is correct (we do 100's of SL3's) no t-taps.    Both vehicles crank, run for a second, then shut down.  On the Pilot, the security light comes on after the failed start attempts.  

Any suggestions?

Answer 1

What starter are you using ?

On the pilot make sure the purple/white is on the good side of the cut data wire. Is has to go on the vehicle side, not the connector side.