Ford Raptor 2013 EVO ALL T harness

Question

Hi, I've done the installation using the tharness with Evo all for raptor 2013. But my surprise when I've went to program the module I've inserted the key but nothing come up in the cluster, not detect the key. so I've put back again all as it was before and still can not read the key when it's inserted in the cylinder. the oem lock, unlock even remote start working from the original key , but can not do anything when the key is inserted . any suggestions? thanx

Answer 1

Ignition harness fuse blown, test all fuse in the passenger kick panel and under hood.

Comments

thank . you was right, but no idea how its happens . Do I need to connect the lock, unlock and driver door pin? The module are programmed but when 3x lock pressed nothing happened. Do you recommend to check options again after programmed? And I have to select only the options as mentioned in the guide only correct ?

---

Yes only the options shown in the guide.

lock and unlock are not necessary. door pin connection is used to shut down the radio when you stop the remote starter. If you don't make this connection radio will stay on for, if I remember correctly, 20 minutes.