Is the Compustar Pro T11 two-way RF Kit compatible with Evo-One

Question

I have installed the T11 Rf Kit to an Evo-One on my 2014 Toyota Tundra and I am not recieving accurate 2-way communication between the remote and the Evo-One. Lock/Unlock/Remote Start functions operate correctly but it is essentially operating as a 1-way remote. I also recieve a false tilt alarm on the remote every time i lock my my vehicle usng the T11. No other 2-way communication exists between the T11 and the Evo-One.

Answer 1

Button mapping was changed somehow. Pressing and holding the trunk button instead of lock allowed the evo one to register the remote. After remote registeration all buttons functioned normally.

Answer 2

You should contact compustar, 2 way communication is between the remote and the antenna.

Comments

I contacted Firstech/Compustar. They pointed their finger at Fortin and said its a compatibility issue with the evo-one and noted that the T11 isnt even listed on your website as being a compatible remote.

They did agree let me send my remote in on warranty and send me out a replacement just in case it is the remote causing the problem. If the replacement remote does the same thing I will let you know.

Is the evo one capable of sending out the temperature from its internal sensor to a Firstech two-way remote?

Answer 3

I contacted Firstech/Compustar. They pointed their finger at Fortin and said its a compatibility issue with the evo-one and noted that the T11 isnt even listed on your website as being a compatible remote. 

 

Comments

They did agree to let me send my remote in on warranty and send me out a replacement just in case it is the remote causing the problem. If the replacement remote does the same thing I will let you know. 

Is the evo one capable of sending out the temperature from its internal sensor to a Firstech two-way remote?