2012 orlando evo all programming step 9 won't pass it,why?

Question

evo all #001A06737960.Guide#29071 as is.RS;Prostart ct-5072. All connections looks good.Evo all programmed perfect,untill step 9 : Afterr yellow led turns off blue comes up soild (sometimes never show up).Also,noticed : the RS antenna's led goes off after, the 5- seconds step(WHY),does that not will affect transmitter communications. Also.need confirmation on ; The RS have 2 wires(12+) with fuses of 20a each(usually); should these fuses value changed to 2a ,cause the Evo all Yellow/blue wire was estated as in the above guide fused by 2A when connected to positive (12+).OR; Is it better, seperate each connection alone connected to (12+) ;RS=20a's and evo all Y/B=2a fuse? .There is something wrong ,here!..Went through all evo all trouble-shooting couldn't figure it out...Thanks.