2010 Corolla Drivers Door Buzzer

Question

When I plug the unit up I get a beeping sound as if the key has been left in the ingition. If I push in the botton on the driver side door (the one that controls the dome light) the sound will stop. I can get the vehicle to start with the remote and turn off. If the doors are unlock before starting they will not lock and if the door is already lock I can not get them to lock with the remote. So basically I have a beeping sound when the unit is plug in, I have no control on locking/unlocking the doors with the remote if the car is running or off. I have full control of the door and no beeping when the unit is out. Could it be fuse, wire incorrectly, bad unit or programing?

My vehical is 2010 Toyota Corolla LE automatic regular start key.

I am using the EVO-One and THARONE-TOY1

 

After looking throught some of the other post I came across one that talked about ground. So I went out and removed the ground wire from the t-harness and the car remotes works, but the evo does notheing. The beeping stoped.

 

Information from back of unit

EVO-ONE Remote Starter & Alarm & Bypass Module

Starter 7.1.21

EVO-ALL 2.4.18

Date 10/2017,

Servicew No: 002b07214675

Service Number : 002b07214675

Answer 1

What version is your evo flashed to?

Comments

Bypass

    Firmware 79. [49]

    Hardware 2.0

Remote Start

   Firmware 1.[24]

   Hardware 7.0