Questions & Answers

Evo-One will not program to a 2012 Tacoma

0 votes
2012 Tacoma, G key. Guide # 78271. Service #002B07340061. Good up to step 4.  Step 5; Turn ingition to on/run no fast flashing red / blue lights. Goes to a slow flasing red. I tried CAN bus removed with 20.2 enabled.
asked Jul 14, 2019 in Toyota by Chris Haas (130 points)

1 Answer

0 votes
slow flashing red indicates an issue with the Immo data wire.
answered Jul 15, 2019 by derek g (324,940 points)
Thank you. A loose connection fixed. Got fast flashing red / blue lights 10x in step 5 and then turned off ignition.  Now can not get RF641W to install. Using guide #33061. No LED on in step 3 of programming remotes.
Press unlock on your oem remote and try the following procedure:

- Ignition ON, OFF, ON

- Press Brake pedal 4 time

-The antenna should be flashing at this point

- Press (-) Then lock on each remote you want to program

- Ignition off

-Test
Did not work. No flasing light on antenna. I only get one quick flash of light when I first plug it into the Evo-One.
Easiest thing to do next would be to call us and we will walk you through the programming of the remotes in the vehicle. It will take less then 5 minutes to do.

 

1-877-336-7797

Mon-Fri

8-6 Est.
...