Questions & Answers

2014 Q50 Infiniti - RFK942 Remotes requires to be re-programmed every 24-36 hours

0 votes
2014 Q50 Push Start with Fortin EVO-ALL EVONIST4 Remote Start Module & T-harness. (Standalone)

BYPASS Firemware 72.43

RFK942 2-Way RF Kit (Installed with RFA2A Cable)

Installed RFK942 RF Kit no isses programming both remoted (Lock,Unlock and start all works) But after 24-36 hours both RM942 remoted stop working. On the Antenna when this happens its blink blue and green once when I use the RM942 remotes(both units). Not sure this is a bug or defected device. When I reprogram both RM942 remotes again it will work fine for day then stops. Also the OEM Fob still works fine starting the vehicle (push lock 3 time)
asked Feb 13 in Infiniti by Allen Wong (130 points)
edited Feb 13 by Allen Wong

1 Answer

0 votes
Opdate your antenna firmware to 1.05. It will solve this issue.
answered Feb 13 by Derek (186,810 points)
Is there anything special or documentations to update antenna firmware to 1.05 ? When I plug the antenna ANT900 directly to Flash-Link 4 the FlashLink Manager 4 does not detech the antenna. The Blue LED still blinks when I run the auto detection in FlashLink Manger.

Flash-Link 4 firmware 4.05 and using the provided cable.

FlashLink Manager Sotware Version 4.51

Thanks

- Open flashlink

- Connect Flash link updater.

- Click Configuration > Special Unit

- Plug in antenna

- Flash 1.05. 

Test in the vheicle. You may need to re pair them in the vehicle after the flash. 

...