2011 Ford Edge Evo All w/ T-Harness Not trying to Start

Question

I was able to complete the programming of the Evo All and was able to teach the transponders but when the lock button is pressed three times the car locks the doors and honks but the Evo does nothing.  The blue LED flashes once everytime the lock button is pressed.  What can I do next for troublshooting?

Answer 1

Can you provide your module service number ?

You need to enable OEM Remote Monitoring, and 3x lock remote starter in your EVOALL options

Comments

Thanks for the help.   I am trying to get the module number from a friend I am helping through this.  How can I enable these features?  I see on the options chart that it has a check next to being able to do this on the EVO All.

---

Ok.  After some reading I see I need to possibly enable the feature using the Flash Link Updater.

 

If I give you the module number can you tell me if it was preconfigured for this already?

---

Firmware version 71-17, hardware version 6, evo ford preloaded, 11 2014. Service number 001A06 441328

---

the options are not enabled at the moment : 001A06441328

Options D1 and C1 need to be enabled. No need to change the default options already set to ON