no I haven't tryed that!!

Question

I'm going back up there in the morning and I'll try it!! But I'm thinking it's either the module or possibly the door pin wire maybe the wires from the EVO are reversed!! The car does have the key cylinder!! Not push to start so can I get away with leaving the door pin disconnected?? Or will the EVO not function properly?? Also the remote start did enter secure takeover the last it mostly worked and gave me like 30 seconds to put the key in the ignition and start complete takeover before it set off the factory alarm!! So that tells me the door pin is correct but maybe I reversed the wires?? What's the easiest way to test for that or is there a way!! I do have a DMM!!

Answer 1

The EVO will work properly even without the doorpin connection. When the starter shut down after it's runtime, the radio will keep playing for about 30 minutes.

I think you either have the wrong wire for parking light or doorpin. The doorpin wire should be ground when door is closed, and about 5v when door is open.