2009 Santa Fe doesn't crank

Question

I have installed the EVO-One in a 2009 Hyundai Santa Fe using guide # 18501.

Based on the pictures/information from WireColor, I added the wires for Lock,Unlock,Arm,Disarm,Horn,ParkingLights.

I'm using an RF641W kit.  I can lock/unlock the doors with the RF641W remote.  When I try to start the engine, the dash and parking lights turn on.  There is a click in the engine compartment, but the engine doesn't crank. The dash lights go out, and the parking lights flash once.

It looks like the T-Harness must connect the White Wire from the main EVO connector to the 2nd Accessory power line on the Key connector.  Is this needed?

Any suggestions?

Thanks in advance.