Remote push start evo all for Nissan GTR, all programmed correctly but won’t start. Break lights shows but no start?

Question

Installed the Evo All in a 2012 Nissan GTR, everything pulgged up correctly on the instructions. Programmed key fob as it shown, went smoothly with every step. Once finished and time to start the car with the oem key fob with the 3x lock button it will not start but only the break light works? How come it did not start up?

Answer 1

I was having the exact problem on a 2016 Juke, don't now if the 2012 GTR is a push-to-start but turns out after months of pulling my hair out it was a 'bad' connection at the PTS button. Once that was fixed (no fault of Fortin) worked like a charm.

Comments

It is a PTS. I’m just confused on what it ccould be. All the T connectors are all plugged in. In the instructions I got that’s all I needed to plug up then program the key fob. There’s other wires but do I need to tap them to anything else? I can press the PTS button and the car starts but just not the 3x lock button.

which connection was the PTS? there was only three T connection and that was it.

Answer 2

Found the problem. After connecting all the T clips (3) from the T-harness, I didn’t tap the white/black wire to the PTS button wire (brown). Once tapped the brown wire on the PTS with the white/black the car started up with the RS pressing 3x lock button. Now since I have auto lights I highly recommend doing the door lock pin. Started the car with the RS, with the auto lights my lights came on (night time). once I turn off the car with the RS the car cuts off but lights are still on due to not having the door lock pin. The car was waiting on the door to be open (acting as I was in the car) and close (acting as I was leaving) before it can turn off the lights automatically. Other than that everything works fine.

Like to thank the Tech Support that help me when I called.