2007 Ford Mustang EVO-ALL 1 Key programming

Question

I'm having an issue with the single key programming of an EVO-ALL in a 2007 Ford Mustang. I get to the fourth step, where you turn the key forward and the blue LED is supposed to flash, however it does not flash for me, rather it just shuts off. When i turn the key off, it turns back on solid blue.

I've verified all my connections about a hundred times, swapped out the EVO-ALL's, made sure my remote starter module is programmed correctly, so any help would be appreciated.

Answer 1

Hello,

That part of programming, where you let go on blue LED and turn ignition on to make it flash, is not necessary for your car. It is only meant for vehicles with CAN-Bus connections. You can skip straight to next section.

Answer 2

I would definitely recommend using the free “Forscan” software you can download to program a second key for the vehicle that’s what I did for my 2011 escape it will say you have to erase all keys programmed and reprogram your current working key and the second key you just had cut, it will say the program worked but your key count didn’t increase, but it does you simply have to exit from the program and you will see your key count in pats anti theft software has increased. Best of luck