Truck shuts off with key turned in run after remote start

Question

Having issues with EVO ALL and FORTIN RF KIT. Main issue. I remote start use Valet key to get in Put key in turn step on break put in D Truck Stalls.

Answer 1

You need to turn key to the RUN position.

Comments

Did that...Turn Key press on brake to engage Drive....

---

You will have to make sure that the vehicle's key is being turned ALL the way to the IGN position (just before cranking) before pressing on the brake pedal.

Because if the vehicle's key is only being turned to ACC, it is normal that the vehicle will shut down since the IGN isn't being powered up because the key isn't in the right position.

Also make sure you are using the 2nd key and not the key that was used to program the Evo-All to the vehicle.

Thank you.