2015 Legacy Security LED is on dimly

Question

I successfully finished the install on a 2015 Subaru Legacy 6 speed manual Evo-One with the t-harness and rf kit. Everything went well and works okay, but after the install the red security light in the cluster stays on all the time while running but its very dim. When the car is off its blinking as its supposed to, but when it blinks "off" its still slightly light up when it should be totally off. Seems almost like its getting a constant back feed from somewhere. I'm not sure if this is a wiring mistake or possibly a bad unit?

Answer 1

Hello,

 

I would go over the security light cut, the orientation of the wires is important on this install, green/red should be connector side and green/white should be harness side.

Also make sure the unit itself has a solid grounding point.

https://cdn02.fortin.ca/download/82731/EVO-ONE_IG_REG_BI_SUB-LEGACY_2015_KEY_A_82731.pdf

Best regards.